There is no best steel for a knife. There are steels suited to one use, and others that are not. A blade that spends its days on a cutting board, between wet vegetables and lemon, does not live the same life as a folding knife that comes out of the pocket at sausage time. The first criterion for choice is therefore what your knife is actually going to do.
The second point to remember: a steel grade never works alone. Its behavior depends on its heat treatment, the geometry of the blade, the edge angle, and how you maintain it. Two knives engraved with the same steel name can cut very differently.
This page gives you a method of choice: the criteria that matter, the real compromises, and some examples taken from what is made in the workshop, in Courpière, in the Thiers basin.
Which steel to choose for a knife, in short?
- Good steel is the one that corresponds to the actual use of the knife, not the one with the most impressive name.
- Stainless steel simplifies maintenance: kitchen, table, humidity, daily use without supervision.
- Carbon steel requires more attention, in exchange for often easy sharpening and a patina that tells the story of use.
- Heat treatment transforms the potential of a steel grade into real performance. Poorly treated, a reputed steel disappoints.
- The geometry of the blade weighs as much as the steel grade: thickness behind the edge, grind, sharpening angle.
- Hardness is an indicator, not a verdict. Harder does not mean better.
- Also think about resharpening: a knife is resharpened throughout its life, so it might as well be possible without laboratory equipment.
There is no universal best steel
The question 'what is the best steel?' keeps coming up. It is incomplete. A knife steel is always a compromise between properties that conflict with each other: edge retention versus ease of sharpening, hardness versus toughness, corrosion resistance versus simplicity of composition. Improving one almost always means giving a little on another.
A kitchen knife requires a thin blade, resistant to moisture, and easy to sharpen between meals. A pocket folding knife needs an edge that can withstand the various uses of a day, including those that are unexpected. A collector's piece accepts more maintenance in exchange for a particular material or design. Three knives, three hierarchies of criteria, three different responses.
The user counts as much as the technical sheet. Someone who wipes their blade after use and sharpens it regularly can choose a reactive carbon steel. Someone who wants a knife that can forgive an evening near the sink will choose a stainless steel. Neither approach is superior. They are simply honest about what each person is willing to do.
The criteria that really matter
Before comparing brand names, put your criteria in order. Here are those that determine the behavior of a blade on a daily basis.
- Corrosion resistance. The steel's ability to withstand water, food acids, and salt without marking. Decisive in the kitchen and at the table.
- Edge retention. The length of time the cutting edge remains effective before requiring honing or sharpening.
- Ease of sharpening. The effort and equipment needed to restore a good edge. An underestimated criterion until the day you have to deal with it.
- Toughness. The blade's ability to withstand shocks and twists without breaking or chipping.
- Edge stability. Edge retention against micro-chipping and rolling, especially on fine geometries.
- Hardness. Measured in HRC after heat treatment. It determines edge retention and the fineness of possible sharpening, but is generally paid for in toughness.
- Overall maintenance. What the steel requires from you between uses: wiping, occasional oiling, vigilance.
- Cost and availability. A consistent shade, available and coherent with the price of the knife is better than a rarity that is hard to maintain.
- Ease of finishing. Some steels take satin or polish well, others reveal a pattern. A secondary criterion for a utility knife, real for a collectible piece.
No steel ticks all the boxes to the maximum. That is precisely why the starting question is not 'which steel?' but 'for what purpose?'.
Stainless steel or carbon steel?
This is the first fork in the road, and it deserves to be asked calmly, without making it a duel.
Stainless steel
A cutlery stainless steel contains enough chromium to form a passive layer that slows down corrosion. Concrete result: the blade tolerates humidity, tomato juice, and leftover bits from meals. For a family kitchen knife, a table knife, or a folding knife that lives in a pocket, it is real comfort.
Watch the vocabulary: stainless does not mean imperishable. A stainless blade left in prolonged contact with salt or acids can pit, especially at the edge. Maintenance is reduced, not eliminated.
Carbon steel
A carbon steel, low-alloyed or not alloyed at all with chromium, reacts quickly to moisture and acidic foods. It develops a gray patina over time with use, and it rusts if left wet. In return, many carbon varieties are easy to sharpen and can take a very fine edge with simple means.
It is not a steel that is "better for cutting" by nature. It is a steel that requires a user who agrees with its rules: we wipe the blade after use, we do not leave it sleeping near the sink, and we accept that the metal bears the traces of meals. Some see this as a constraint. Others, as the biography of the knife.
To go further in this choice, the dedicated page compares the two families in detail: Stainless or carbon steel.
Heat treatment changes the behavior of the blade
A steel grade sets a potential: a chemical composition, an achievable hardness range, possible properties. Heat treatment transforms this potential into real behavior. Quenching and tempering determine the final hardness, toughness, and edge stability.
This is why two blades of the same grade can have very different lifespans. An ill-suited treatment produces a blade that is too soft, rolling its edge, or too tense, chipping at the first bone. A treatment consistent with the grade, the blade section, and the intended use produces a predictable knife that does what is expected of it.
The hardness values listed on the product sheets therefore only make sense when related to a specific treatment and a given geometry. An HRC number alone says almost nothing. The complete operation is explained on the page dedicated to the heat treatment of cutlery steel.
Geometry matters as much as the name of the steel
The third pillar, often absent from steel comparisons, is the shape of the blade itself:
- the thickness of the spine;
- thebevel, that is to say the way the blade tapers toward the edge;
- the thickness just behind the edge, decisive for the cutting feel;
- the sharpening angle, and the possible micro-bevel;
- the finish of the edge, more or less polished depending on the use.
A fine kitchen blade glides through a carrot because it removes little material. A thick blade in the same steel will force, no matter how careful the sharpening. Conversely, a folding knife intended for harsh use benefits from keeping a bit of thickness behind the edge, even if tomato slicing suffers.
Hence a rule that is worth remembering: a simple steel, well treated and well shaped, often produces a more pleasant blade than a steel reputed to be poorly exploited. The name engraved on the blade cuts nothing. Geometry, does.
Which steel for which use?
For a kitchen knife
The kitchen is a hostile environment for steel: constant water, lemon juice, onions, repeated washings. The blade is thin, so it is more exposed to micro-chipping. For most users, a fine-grain stainless steel is the consistent choice: it tolerates the pace of meals, can be resharpened without exotic tools, and can withstand being washed by someone other than its owner.
Carbon steel remains possible in the kitchen, for a user who wipes their blade between cuts and enjoys refreshing the edge with a gesture. It is a choice for experienced users, not a default choice.
For further reading: which kitchen knife to choose, and the FL Toussaint kitchen knives.
For a pocket knife
A folding knife lives in a pocket, with the sweat, moisture, and crumbs that come with it. It comes out for snacks, string, cardboard, the apple for a snack. Its priorities: an edge that can withstand various uses, corrosion resistance sufficient for pocket life, and realistic sharpening with an ordinary stone.
Edge retention matters, but less than you think: a folding knife that is very hard to resharpen often ends up dull, because we postpone the chore. The mechanism and blade shape also play a role: a thin snack knife blade and a more robust blade do not require the same balance between hardness and toughness.
For further reading: how to choose a pocket knife, and the FL Toussaint folding knives.
For a table knife
At the table, the blade encounters salt, vinegar, mustard, and is rarely wiped between courses. It then passes through several hands for washing. Stainless steel is the logical choice in the vast majority of cases: it allows for a fine geometry, pleasant on the plate, without imposing maintenance requirements on everyone at the table.
See the FL Toussaint table knives.
For a collectible piece or an expressive piece
On a unique piece, the steel contributes to the design. A Damascus steel brings a pattern, a powdered steel allows for a fine polish, a carbon grade will develop its patina. The accepted maintenance is higher, and it is a deliberate choice: these knives are as much looked at as they are used.
The usage criterion does not disappear for all that. A FL Toussaint collector's piece remains a knife that cuts, designed to end up on a table one day or another. The workshop creations show how steel, handle material, and design interact on these pieces.
Selection aid chart
| Use | Main priority | Generally coherent family | Desired advantage | Compromise or maintenance | To consult |
|---|---|---|---|---|---|
| Everyday kitchen use | Tolerance to moisture and acids | Fine-grain stainless steel | Thin blade, simple maintenance | Edge retention medium depending on the grade | Kitchen guide |
| Kitchen, careful user | Easy sharpening, cutting pleasure | Carbon or stainless steel | Thin edge, revived with a gesture | Wipe after use, patina accepted | Maintaining a carbon blade |
| Everyday pocket knife | Versatility and durability of the wire | Balanced stainless steel | Pocket life without supervision | Periodic sharpening | Pocket guide |
| Table knife | Resistance to acids and salt | Stainless | Fine geometry, easy collective maintenance | Few compromises for this use | Table knives |
| Humid environment | Corrosion above all | Stainless | Blade that forgives forgetting | Rinsing and drying are still recommended | Stainless or carbon |
| Collector's item | Design, material, finish | Damascus, powder steels, patinable carbon | Pattern, polished, visual character | More attentive, assumed maintenance | Damascus knives |
| Easy sharpening is a priority | Resharpening with simple means | Low-alloy carbon or stainless | Edge restored on ordinary stone | Shorter edge retention | Sharpen and hone |
| Minimal maintenance desired | Forgetfulness tolerated | Stainless | No patina, no surprise rust | Sharpening sometimes longer depending on the grade | Stainless or carbon |
Some steels worked in the workshop
Rather than a ranking, here is how some nuances find their place in FL Toussaint knives and what they demand in return. The characteristics mentioned correspond to the steelmakers' datasheets; the final behavior depends on the heat treatment and geometry of each blade.
N690
A cobalt stainless steel, developed by the Austrian steelmaker Böhler. It offers good corrosion resistance and takes a consistent edge, making it a coherent base for folding knives intended for everyday carry. Its compromise: decent edge retention without reaching that of highly alloyed powder steels, which in turn makes it reasonably easy to sharpen.
14C28N
A stainless steel grade with nitrogen specifically developed for cutlery by the Swedish steelmaker Alleima. Its fine grain allows for a stable edge on fine geometries, with very good corrosion resistance: a profile suitable for kitchen knives and everyday folding knives. On the other hand, its wear resistance remains moderate compared to carbide-rich grades; sharpening is needed a little more often, but without effort.
RWL34
A stainless steel derived from powder metallurgy, appreciated in fine cutlery for its homogeneous grain and its ability to receive a careful polish. It finds its place on more intricate pieces, where finish and edge retention justify a sharpening that requires a bit more technique. Its cost reserves it for knives whose quality level is consistent with the material.
Z50CDV13
A stainless steel shade of French cutlery, common in the Thiers region, particularly in professional kitchens. It favors toughness and ease of sharpening over pure edge retention: a blade that withstands use and sharpens quickly. Its compromise is accepted: you go over the honing rod or stone more often, and it only takes a moment.
C130
A high-carbon carbon steel, without chrome to protect it. It takes a very fine edge with simple means, making it a suitable choice for blades intended for a careful user. In return, it patinas when in contact with food and rusts if left wet: a C130 knife is wiped after use, period.
Stainless Damascus Steels
Layered steels whose pattern comes from the assembly of different shades. On the FL Toussaint pieces concerned, Damascus gives the blade its design without giving up the corrosion resistance of stainless steel. The pattern changes nothing about the rules of cutting: it’s the geometry and treatment that create the sharpness. The dedicated page to theDamascus steel details manufacturing and maintenance.
How I choose a steel in the workshop
When I design a knife, the steel comes after three questions: what will it be used for, what geometry should it have, what maintenance will its future owner accept? Once these questions are answered, the list of candidate grades reduces by itself. I add workshop criteria: the consistency of the grade from one supply to another, the control of its heat treatment, and a cost consistent with the knife's level. An expensive steel on an affordable knife distorts the price; a fragile steel on a utility knife distorts the promise.
On series models, heat treatment or a preparatory grinding can be entrusted to a specialized partner, with a precise specification for each grade. Custom-made pieces are entirely manufactured in the workshop. In all cases, fitting, assembly, finishing, sharpening, and final inspection are done here, in Courpière: this is where I check that the chosen steel keeps the promise of the knife.
Preconceived ideas to leave at the door
"Carbon cuts better than stainless"
No, not by nature. With equivalent geometry and treatment, a good modern stainless steel cuts just as well. Carbon retains a real advantage in ease of sharpening over many grades, which gives the impression of a knife that is always more sharp. It is the maintenance that cuts, not the steel family.
"Stainless steel never rusts"
It rusts less, and more slowly. Leave a stainless steel blade in prolonged contact with salt or lemon juice, and pitting can appear, especially on the edge. Rinsing and drying remain the rule, even for stainless steel.
"Harder, therefore better"
Harder, so harder. Hardness helps the edge hold, but it comes at the cost of toughness: a very hard blade chips more easily on a bone or a glass board. The right number is the one that matches the use, not the highest.
"A steel that is easy to sharpen is a mediocre steel"
It is often the opposite for a utility knife. An edge that can be refreshed in two minutes is an edge that is actually maintained. A very wear-resistant steel but difficult to sharpen often ends up dull in a drawer.
Two knives in the same steel are worth the same
No. Between the steel and the knife, there is heat treatment, the grind, the thickness behind the edge, and the sharpening angle. The same steel name can produce a remarkable blade or a disappointing knife. The name guarantees nothing: it is the whole that matters.
« Damascus cuts better »
Damascus provides a pattern, not different physical laws. A well-treated and well-shaped Damascus blade cuts very well; an equivalent homogeneous blade does too. Damascus is chosen for its design and character, not for a cutting advantage.
"An expensive steel makes a good knife"
An expensive steel makes an expensive knife. Quality comes from consistency: a grade suited to the use, controlled treatment, correct geometry, careful assembly. An expensive steel poorly used results in an expensive and disappointing knife, which is the worst combination.
Choose a knife rather than a steel name
When buying, do not start from a steel grade. Start from your use, then look at everything: the shape and geometry of the blade, the announced heat treatment, the quality of the assembly, the required maintenance, the possibility of making resharpen the blade over time. A knife consistent on all these points will serve you for years, whatever the name engraved on the steel.
If your knife will live in the kitchen, start with the cooking knives. If it needs to fit in a pocket, the folding knives cover everyday uses. And if it is the blade design that attracts you, the Damascus blade knives and the workshop creations show what these steels allow. For a specific need that does not fall into any of these categories, the best thing remains to talk about it directly.
Technical sources
- Technical datasheets of the mentioned steelmakers: Böhler (N690), Alleima (14C28N).
- Documentation from the producers of powder steels and stainless Damascus steels used in the workshop.
- Reference metallurgical documentation on the heat treatments of martensitic knife steels.