FL Toussaint is the artisanal cutlery workshop of François-Louis Toussaint, a craftsman cutler based in Courpière, in the Puy-de-Dôme. The town is located a few kilometers from Thiers, in the cutlery basin of the same name: a territory where knives have been made for several centuries, and where they are still made today. The workshop designs and produces pocket knives, kitchen and table knives, as well as reinterpretations of French regional knives. Pieces made for slicing bread, cutting into cheese, or preparing a meal — not for sleeping under glass. This page presents the place, the craftsman, what is actually made in Courpière, and what it means today to work in the Thiers basin.
A cutlery workshop established in Courpière
Courpière is a commune in Puy-de-Dôme, in the Dore valley, in Auvergne. Thiers is a few kilometers away by road. It is here, in Courpière, that FL Toussaint knives are designed, adjusted, assembled, and finished.
The distinction deserves to be made clearly because it is often blurred. The workshop is not located in the commune of Thiers. It is in Courpière and belongs to the Thiers cutlery basin: a group of communes where knife making still structures part of the activity, trades, and professional exchanges. Both statements are true at the same time, and neither replaces the other.
Being a cutler in Courpière, therefore, is not being isolated in the countryside with a vise and good will. It is working close to steel suppliers, heat treatment workshops, and specialists in sharpening and polishing. When a technical question arises, the answer is often found a few kilometers away. One does not settle here by chance.
The workplace itself — organization, equipment, actions carried out on site — is presented in detail on the page dedicated to the Courpière workshop.
Working in the Thiers basin today
The Thiers basin is not a museum. Part of the workshops of the past has disappeared, others have become industrialized, and some artisans continue to make knives there on their own scale. What remains, and what matters to a cutler, is a professional culture: a common vocabulary, specialized trades, skills concentrated in a restricted area.
Working here means being able to talk about grinding, springs, miters, or engraving with interlocutors who perform these operations all week. It means finding a partner for heat treatment, a supplier for a specific steel, an experienced opinion on an assembly. This continuity between design, production, and use still exists in the area, and it concretely changes the way of manufacturing.
It also allows for combining inherited methods and current tools. In the workshop, the cutting of the blades is done by laser, on files designed and programmed by François-Louis Toussaint himself — then each knife is adjusted, assembled, and finished by hand. The workshop allows this back-and-forth between the old and the contemporary, without pretension.
The development of this production, its organization, and its evolutions are documented in the file dedicated to the history of Thiers cutlery.
François-Louis Toussaint, artisan cutler
François-Louis Toussaint has been working in cutlery since 2010. Initially trained in metalwork, he learned the craft in the Thiers area, then spent several years in renowned workshops before working under his own name in Courpière.
Each knife that comes out of the workshop bears his signature: a stamp struck in the tradition of master stamps — a carnyx within a diamond, framed by the initials FL and T. An unsigned piece is not an FL Toussaint piece.
His itinerary — training, experiences, steps toward the current workshop — is detailed on the page that allows discover the journey of François-Louis Toussaint.
Knives designed to serve
The workshop produces several families of knives, all connected to a real use:
- folding pocket knives, for snacks, the market, or the workday;
- reinterpreted French regional knives, which take forms from the cutlery heritage and adapt them to today's uses;
- kitchen knives, for the daily preparation of meals;
- table knives, made to stay next to the plate and be used at every meal — bread, cheese, meat, shared board.
Some models exist in small series, at a more accessible price. Others are one-off pieces, more advanced in materials and finishes. In both cases, the rule does not change: a FL Toussaint knife must cut, feel good in the hand, and last. It can join a collection or be given as a gift — provided it remains a knife that is used.
The current models and pieces can be found among the FL Toussaint handcrafted knives.
What is done in the workshop
Specifically, the following operations are carried out in Courpière:
- design of models, drawing of lines and proportions;
- preparation of cutting files and laser cutting of blades;
- fitting of parts together;
- assembly;
- shaping of handles;
- touches and finishing;
- sharpening;
- final inspection before shipment.
The division of labor is simple and assumed. Custom pieces are entirely made in the workshop. On certain standard models, two operations — heat treatment and sharpening — may be entrusted to professional partners. Design, adjustment, assembly, finishing, and inspection remain, in all cases, carried out by François-Louis Toussaint in Courpière.
Each step, from the drawing sheet to the sharpened edge, is explained on the page dedicated to stages of making a handcrafted knife.
A local cutlery, not a regional decoration
The word 'local' has become a selling point. It deserves to be verified. At FL Toussaint, the connection to the Thiers area is based on simple facts: a real workshop in Courpière, a craft learned and practiced in the area since 2010, knives actually designed, assembled, and finished on site, and a daily relationship with the local trades. Not a mailing address, not a photo of a volcano in the banner.
Territory is not printed on a box. It is learned in workshops, it circulates between trades, and it is verified in the assembly of a knife.
Thiernoise cutlery does not need folklore to exist. It needs workshops that produce. This one is part of it.