The Breton knife

Price: €150.00

The Breton knife, also called the London, is a French pocket folder with a sheepsfoot blade in 12C27 stainless steel, handcrafted in France. Its rounded tip and square-tang slip joint (cran plat) make it a simple, safe knife that is easy to live with. It descends from the sailors’ knives made in Thiers from the 19th century onward and sold all along the Atlantic coast.

Handle material
Available immediately: dispatched within 2 business days of payment. Estimated delivery in mainland France: 2 to 5 business days to your home, 2 to 7 business days to a pickup point.
Last item available
  • Handmade at the workshop.
  • Delivered with certificate of authenticity and lifetime warranty.
  • Careful shipping from France.

Be notified when it can be ordered

This model or some of its versions cannot be ordered at the moment. Leave your email address: we will write to you once, when the version you choose can be ordered.

The Breton knife

Description

The Breton knife is recognizable at first glance: the spine of the blade drops toward the front, the rounded tip lines up with the edge, and the whole silhouette says this is a working knife. This profile, called sheepsfoot, comes from the maritime world. On board, a tip that pierces is a hazard, whereas a straight edge running all the way to the end of the blade is useful. This practical logic has lasted a century and a half without losing its point.

The flat handle with a front bolster settles naturally into the hand. The blue, white and red spacers slipped between the liners and the handle scales mark the model discreetly. The stainless steel screws let it be taken apart cleanly if the knife ever has to come back to me for refurbishing.

The mechanism deserves a moment of attention. It is a square-tang slip joint, known in French as cran plat: the heel of the blade bears against the spring, which holds it in both the open and the closed position. There is no lock, only a firm resistance when opening and closing, as on the traditional folders it descends from. A relief cut in the spring (poncetage) keeps the edge from touching it when the knife closes, so the edge is preserved and the knife closes without damaging itself.

The 12C27 stainless steel blade, 3 mm thick with a flat grind, puts up with being forgotten in a jacket pocket, apple juice and a slice of saucisson without asking for special care. The stamped nail nick allows a deliberate two-handed opening, in keeping with the spirit of the model.

Closed, it measures 10 cm and weighs about 105 g, a size you forget in your pocket until it is time to eat. Open, its 19 cm, including about 9 cm of blade, are enough for bread, cheese or an apple cut into quarters on the corner of a board. It is an everyday knife, made to come out often.

It joins the workshop’s French regional knives, alongside the handmade pocket knives in the rest of the range. Its history has traveled much further than its name suggests, and it is told below.

History & inspiration

Calling this knife “the Breton” requires an honest explanation. Brittany is indeed part of its history, but as a place where it was used rather than where it was born. The real story, more interesting than the folklore, plays out between three geographies: England, Thiers and the Atlantic coast.

A knife of western France, made in Auvergne

In the 19th century, Thiers made knives for all of France, and often under names other than its own. The region employed about 25,000 people in 1855 and produced a multitude of so-called regional knives, intended for areas far from Auvergne. In an irony of history, the French capital of knives would not have its own model, Le Thiers®, until 1994. The Breton knife is part of this production of traveling knives, shipped west through trade networks that were already well established.

An openly English inspiration

The shape comes from across the Channel. Sheffield cutlers had long produced blades with a sheepsfoot profile, “pied-de-mouton” in French, suited to shipboard use. When this family of knives arrived in France, it received telling nicknames: “genre anglais” (English style), “marin” (sailor’s knife) or “London”, probably because at the time anything that came from England seemed to come from London. “London” therefore refers to a shape and a lineage, neither an English brand nor a regional name.

The Pradel, a documented reference point

The most solid landmark in the story has a name: the Pradel. According to Brigitte Liabeuf, former curator of the Musée de la Coutellerie in Thiers, its birth certificate dates from around 1867, when Étienne Pradel, of the Pradel-Chomette firm, whose trademark showed a ship’s anchor, presented an English-style knife at the Exposition Universelle. It would sell all along the west coast, from Normandy to the Bordeaux region by way of Brittany. A sailors’ knife, it was also a knife for farmers, laborers and coastal workers: above all, a tool of ordinary people.

Sailors, topmen, Newfoundland fishermen

The maritime context is very real. The ports of the Channel and the Atlantic were then fitting out thousands of men for the great cod fishery off Newfoundland. On board, a sturdy folder was used for rope, fish, meals and a host of daily tasks. The rounded tip limited injuries when the ship rolled and worked the line without snagging. Soaked in seawater, these knives rusted quickly, and few old pieces have survived, which partly explains the gray areas in the story.

What remains uncertain

Some stories still circulate and deserve to be flagged as such. The etymology from a naval battle against HMS London remains a narrative hypothesis, without corroboration. No primary source confirms the regulation, sometimes attributed to Colbert, that supposedly required sailors to break off the points of their knives either. As for a standardized “Breton knife” handed down without interruption for two centuries, the available sources suggest rather a family of similar shapes, with changing names, distributed throughout the west of France. The documented history is more than enough to make this knife interesting.

The Breton knife today

The Breton knife offered here follows directly in this tradition. It is a production model made by the knife industry of the Thiers cutlery region, as were the knives that left for the Atlantic ports a hundred and fifty years ago. Each knife then goes through the Courpière workshop for fitting, assembly, finishing and sharpening.

Sources and further reading

  • Brigitte Liabeuf, former curator of the Musée de la Coutellerie in Thiers: dating of the Pradel to “around 1867” and its link with the Exposition Universelle.
  • Camille Pagé, La Coutellerie depuis l’origine jusqu’à nos jours (late 19th century): English-style sailors’ knives and their manufacture in Thiers.
  • Christian Lemasson, Couteaux de France. Histoire des couteaux régionaux (Artémis, 2020).
  • Musée national de la Marine and Musée des Terre-Neuvas in Saint-Malo: background on the great cod fishery.

Materials

The blade is cut from 12C27, a classic stainless cutlery steel. For a pocket knife, it is a common-sense choice: it tolerates moisture, acidic fruit and forgotten drying, resharpens without difficulty and ages well with minimal care. Its 3 mm thickness and flat grind give a sturdy blade, suited to table and pocket use.

The mechanism relies on three parts: two liners, a spring and the square tang of the blade that bears on it. The liners are relieved to make the action smoother, their inner edges are softened to the touch, and the inside of the spring is polished. The front bolster, which houses the pivot pin, reinforces the most stressed area of the handle. The blue, white and red fiberglass spacers, visible along the edge of the handle, are a discreet reminder of where this knife comes from. The handle is fastened with stainless steel screws, which makes upkeep and future repairs easier, and the metal parts receive a satin finish.

Eight handle options are offered:

  • Boxwood: blond, with a tight grain, it develops a gentle patina with the years and the hand.
  • Cade: a Mediterranean juniper with marked figure, whose scent is unmistakable while it is being shaped.
  • Olive wood: streaked with brown on a honey background, it makes every handle different.
  • Gabon ebony: dense and almost black, understated to the touch and to the eye.
  • Padauk burl: swirling figure and a warm tone for the boldest versions.
  • Black horn: the historic material of traditional folders, with every slab unique.
  • Blond horn: the same material in its light shade, each slab unique as well.
  • Elforyn: a modern ivory substitute, uniform and stable, which gives the look of ivory without any protected animal material.

The Breton knife is a production model, following an old Thiers practice: its parts come from the knife industry of the Thiers cutlery region, then each knife is fitted, assembled, finished, sharpened and checked one by one in my workshop in Courpière. The stamp engraved on the blade signs this work.

Use & care

The Breton knife is a versatile pocket knife, designed for everyday life: a quick lunch, an apple, the bread and cheese of a picnic, the string on a parcel and all the small cutting jobs of a day. Its rounded tip changes the way you work a little, since it does not pierce: it slices. For everything that is cut on a board or in the hand, the straight edge does the job very well.

You also need to know its limits. Like any square-tang slip joint, it has no lock, so it should not be used for twisting, batoning or heavy work. It is a pocket knife, not a bushcraft knife, and it fills that role very well.

Everyday care

  • Wipe the blade after use, especially after acidic or salty foods, then dry the knife before putting it away. 12C27 is stainless, but not invulnerable.
  • Avoid the dishwasher and any prolonged soaking: water seeps into the pivot, and wood does not like it.
  • Wood and horn handles react to ambient humidity: dry storage and, for wood, a little oil from time to time are enough to keep them in shape.
  • Keep the pivot clean, with a drop of suitable oil if the opening becomes less smooth.
  • Sharpen when the edge starts to slip, without waiting for it to be completely dull: a few regular passes are better than a major overhaul.

If the knife has seen a lot of use, the workshop can sharpen and refurbish it. Assembled with screws, it can be taken apart, repaired and set off again for years.

Customer reviews

No reviews yet.

Be the first to share your experience with this product.

Review photos

Testimonials

Guestbook

Testimonials selected by the workshop: featured ones first, then in the order it has set, from the most recent to the oldest.

  • Beautiful knife with an excellent finish. I love the longitudinal satin finish on the blade. Fast shipping (with some sweets included too :) Everything is spot on.

    P.M. Added on

  • Understated, carefully made, superb lines, and a presentation to match. A superb Kiridashi that I’m going to give to my daughter to accompany her in her creative work.

    F.A.V. Added on

  • Simply magnificent. I had dreamed of owning a Breton/London knife for years without ever finding a model that suited my taste. Thank you, François, for your craftsmanship. Proof…

    B.P. Added on

Read the guestbook

Frequently asked questions

What is a Breton or London knife?
This is a sheepsfoot blade folding pocket knife: back folded forward, rounded tip aligned with the edge. This family of knives, of English inspiration, was largely manufactured in Thiers at 19th century and distributed throughout the Atlantic coast, where it was used by sailors and farmers alike. “Breton” and “London” today designate the same type of utility knife, simple and robust.
Is the London really a Breton knife?
Not in the strict sense. Brittany belongs to its historical distribution zone - sources place it from Normandy to Bordeaux - but the model was manufactured in Thiers and inspired by English knives from Sheffield. The “Breton” label was established through usage and trade rather than through a documented regional origin. It is a knife from the maritime West, adopted by the Bretons among others.
Why does the blade have a rounded tip?
This sheepsfoot profile comes from on-board uses: a blade without a sharp point limits injuries when rolling and allows the rope to be cut by pressing the entire length of the cutting edge. Tradition sometimes mentions a regulatory obligation to break the points upon boarding, but no primary source confirms this. The shape is explained firstly by the common sense of working at sea.
Where does the name “London” come from?
This is a nickname given in France to this English-style knife - probably because at 19th century, everything that arrived from England seemed to come from London. He has also been called "English kind", "sailor" or "topman". The hypothesis of a name inherited from a naval battle against the HMS London comes from the story, not from the documented fact.
What is the difference between a London and a Pradel?
The two names largely cover the same family. The Pradel is the best-documented landmark: presented around 1867 at the Universal Exhibition by Étienne Pradel, this English-style knife was first nicknamed "london" or "sailor" before retaining the name of its manufacturer. Depending on the workshops and periods, the proportions and finishes vary, but the relationship is direct.
Which steel is used in the Breton FL Toussaint knife?
A stainless steel 12C27, in 3 mm thickness, mounted in Flat grind. It is a steel proven in pocket cutlery: it resists everyday corrosion well – fruit, cheese, humidity – and is easily resharpened. Historical sailor’s knives were made of carbon steel and rusted quickly on contact with seawater; stainless steel solves this problem without changing the character of the knife.
Where and how is this knife made?
Le Breton is a series model: its parts come from the cutlery production of the Thiers basin, exactly like the knives of this family which left for the Atlantic at 19th century. Each copy is then adjusted, assembled, finished, sharpened and checked in my workshop in Courpière, in the Thiers basin, before receiving the FL Toussaint hallmark on the blade.
How to maintain your mechanism and handle?
Wipe and dry the knife after use, avoid dishwasher and immersion. Keep the joint clean, with a drop of suitable oil if necessary. Wooden handles appreciate dry storage and light oiling from time to time; the horn simply asks to avoid prolonged heat and dryness. Sharpen regularly, without waiting until the edge is dull.
Back to top